You deserve
to know

25 In the SMR range there are the following ranges:

MD (manual defrosting)
This is the most basic version that FRICON offers its customers.
This is equipment that preserves food at negative temperatures.
In order to defrost this equipment, it must be disconnected from the mains.
When connected to the mains, the compressor works until the equipment reaches a certain desired temperature (example: -20ºC). After reaching this temperature, the compressor switches off during the hysteresis period (until it reaches -18ºC, for example).
The procedure associated with this type of version involves greater effort on the part of the compressor, which consequently results in higher energy consumption compared to the other versions.

AD (automatic defrost)
This is the most advanced version after the MD version.
In this case, the appliance does not need to be disconnected from the mains to defrost its internal walls. Defrosting takes place automatically via a hot gas circuit where the ice accumulated on the internal walls is melted keeping them clean, guaranteeing greater energy efficiency for the consumer. The equipment is programmed to carry out an automatic defrost every 24 hours, but if the customer wishes they can set up to 6 automatic defrosts / day.
The defrosting process is very quick (around 20 minutes) and guarantees the quality of the goods stored inside the freezer.
When connected to the mains, the compressor works until the equipment reaches a certain desired temperature (example: -20ºC). After reaching this temperature, the compressor shuts down during the hysteresis period (until it reaches -18ºC, for example).

AD/VS (automatic defrost / variable speed) or VCC (variable capacity compressor)
This version is the most advanced and efficient of the FRICON products.
Like the AD version, this version does not need to be disconnected from the mains to defrost the inner walls of the preservers. Defrosting takes place automatically via a hot gas circuit where the ice accumulated on the internal walls is melted keeping them clean, guaranteeing greater energy efficiency for the consumer. The units are programmed to defrost automatically every 24 hours, but if the customer wishes they can set up to 6 automatic defrosts / day.
The defrosting process is very quick (around 20 minutes) and guarantees the quality of the goods stored inside the freezer.
When the freezer reaches the desired temperature (e.g. -20ºC) the compressor slows down and switches off less often.
This performance avoids additional efforts on the compressor's performance, contributing to high energy savings and making the equipment more efficient.
The ADVS / VCC version contributes to savings on the M/L Deadline by guaranteeing faster turnover to the consumer than any other version.

Consumption varies according to each product, so you can find the information on the characteristics label and in the technical data sheet for each device.

The cost of repairing out-of-warranty FRICON equipment is tabulated according to the distance and location of the repair, as shown in the table below. However, you should consult technical assistance to confirm the cost of the repair, as this may change.

The following services are included in the labor cost:

• Gas charge;
• Filter;
• Thermostat;
• Lamps and beacons;
• Grills and shelves;
• Cleaning / Testing;
• Fans;
• Power cables;
• Castors and sliders;
  Handles;
  Motor fans;
  Evaporator / Plate

In addition to the services included in this table, and if necessary, the value of the following components will be added:

• Compressor ;
• Lids/Doors
• Condenser;
• Centraline / Controller

The temperature and humidity conditions vary according to each product, so this information can be found on the characteristics label and in the technical data sheet for each piece of equipment.

The most common parameters are: reference temperature; temperature oscillation interval; defrost time and schedule; and temperature alarm.

Freezing equipment is designed to receive products at room temperature and freeze them quickly.

Freezers are usually household appliances used for storing meat, fish, vegetables and other foods that are in their normal state (i.e. not frozen).

Refrigeration equipment, on the other hand, is designed to receive food or drink and keep it fresh.

And it's easy to see the difference with the others, as the temperature of this type of solution varies between 0ºC and 8ºC.

Did you know that there is a difference between a freezer and a canner?

Go to our article "What's the difference between a freezer and a refrigerator?", dedicated to this topic, to get a detailed understanding of the differences between conservators, freezers and refrigerators.

If you have any questions about FRICON technical assistance, you can contact us by e-mail or telephone:

assistência.tecnica@fricon.pt

tlf: +351 252 640 196 (AT)

For questions regarding the operation/repair/purchase/pricing of FRICON equipment, please contact:

geral@fricon.pt

Tel: +351 252 640 140

M: +351 961 980 000

The warranty periods are in accordance with the current decree law in force.

24 months for private customers;

6 months for commercial or industrial clients.

*The warranty only covers manufacturing defects.

FRICON exports to more than 150 countries around the world and is present on five continents.

The refrigerant gases used in FRICON equipment vary depending on the equipment, so this information is included on the characteristics label and in the technical data sheet for each product.

Environmental issues and sustainable development are priority topics for the FRICON group, which is why refrigerants are selected with the environmental implications in mind.

FRICON suppliers are selected according to technical requirements that guarantee our customers' complete satisfaction.

The main suppliers for compressors and controllers are:

Compressors: Embraco and Danfoss

Controllers: Carel and Danfoss.

Yes, all FRICON equipment can be customized according to the customer's pre-defined layout.

If a FRICON device breaks down, you can contact the FRICON Technical Assistance service.

You can contact us by e-mail or telephone.

e-mail: assistencia.tecnica@fricon.pt

tlf: 252 640 196

When contacting us, you should mention the fault and details of the equipment (model and serial number), together with the purchase receipt to validate the guarantee and telephone contact details.

Yes, via CTT up to 2Kg; via courier after 2Kg.

You can purchase FRICON accessories by e-mail.

To do this, you must attach the completed "Accessories Request" form.

Form: Accessories request

E-mail: posvenda@fricon.pt

The minimum number of orders is subject to analysis, usually a complete container or truck.